Ohio Waterfowler Forums banner

Dove Silhouettes

1243 Views 4 Replies 4 Participants Last post by  mslater
My latest decoy project, just in time for dove season. I cut 28 silhouettes out of a piece of 1/4" plywood 2'x4'. I primed all the decoys with grey rustoleum primer and used flat rustoleum colors for the finish. For supports I cut 1/2" PVC into 15" lengths, connected together with a 4 way cross and used 90 degree elbows on the ends that I notched out with a sawsall. All the parts disassemble and can be carried in a 5 gal bucket.

Wood Rectangle Font Pattern Wood stain

Wood Art Plant Tree Pattern

Bird Beak Stock dove Rock dove Water

Bird Motor vehicle Gas Engineering Automotive exterior

Bird Plant Beak Feather Grass


See less See more
1 - 5 of 5 Posts
good lookin rock.
How'ed they work for ya.
I'll let ya know this weekend.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.